Audio and music

Online Guitar Tuner

Start the Guitar Tuner, then play one string at a time. The tuner shows whether the string is flat, sharp or in tune and guides you toward the target note.

Online Guitar Tuner

Tune your guitar using your microphone. Standard tuning is E A D G B E.

Your browser will ask for microphone access only after starting.
Standard six-string guitar tuning: 6th (E2, 82.4 Hz), 5th (A2, 110 Hz), 4th (D3, 146.8 Hz), 3rd (G3, 196 Hz), 2nd (B3, 246.9 Hz), 1st (E4, 329.6 Hz).

Understanding the result

The live guitar tuner highlights the targeted string (from 6th Low E up to 1st High E), displays its nominal target frequency based on your A4 concert calibration, and calculates the exact pitch difference in cents. An active needle meter shows whether your string is Flat, Sharp, or In Tune (within ±4 cents) with practical guidance on which way to tune.

How to use this tool

  1. Click 'Start Guitar Tuner' and allow microphone access when prompted.
  2. Select your desired tuning (Standard E A D G B E is selected by default).
  3. Pluck one guitar string clearly and allow it to ring, keeping adjacent strings muted.
  4. Watch the real-time cents needle: if Flat, gently raise the pitch; if Sharp, lower the pitch.
  5. Adjust your tuning peg in small increments until the needle centers and displays 'In tune'.
  6. Repeat this procedure across all six strings from Low E (6th) to High E (1st).

How to Tune Your Guitar Online with a Microphone

Tuning an acoustic, classical, or electric guitar online is straightforward and accurate. Click 'Start Guitar Tuner' and allow microphone permission in your browser. Position your instrument 6 to 18 inches from the microphone. Pluck one string at a time with a pick or your thumb, letting it ring freely while using your free fingers to lightly damp the other five strings. The tuner immediately identifies the nearest string target, measures the fundamental audio frequency, and displays your pitch deviation in cents. If the needle sits to the left (Flat), gently tighten the tuning peg to raise the pitch. If the needle sits to the right (Sharp), loosen the peg to lower the pitch. Repeat for all six strings until each settles in the green 'In tune' zone.

Standard Guitar Tuning: E A D G B E Explained

Standard guitar tuning arranges the six open strings in ascending pitch from the lowest/thickest string (6th string, Low E) to the highest/thinnest string (1st string, High E). The notes are E2 (approx. 82.41 Hz), A2 (110.00 Hz), D3 (approx. 146.83 Hz), G3 (approx. 196.00 Hz), B3 (approx. 246.94 Hz), and E4 (approx. 329.63 Hz). This classic layout primarily uses intervals of perfect fourths (5 semitones between E-A, A-D, D-G, and B-E) with a single major third interval (4 semitones between G and B), enabling guitarists to form full six-note chords and fluid scale runs with natural hand ergonomics.

Standard Guitar String Frequency Reference Table (A4 = 440 Hz)

Below are the fundamental frequencies for six-string guitars in standard 12-tone equal temperament: String 6 (Low E, E2) = 82.41 Hz; String 5 (A, A2) = 110.00 Hz; String 4 (D, D3) = 146.83 Hz; String 3 (G, G3) = 196.00 Hz; String 2 (B, B3) = 246.94 Hz; String 1 (High E, E4) = 329.63 Hz. Note that if you adjust the reference pitch calibration in the tuner settings (for instance from 440 Hz to 442 Hz or 432 Hz), all target string frequencies recalculate dynamically.

Understanding Flat, In Tune, and Sharp Readings

The cents scale measures musical micro-intervals where 100 cents equals exactly one semitone. This tuner features a calibrated ±50 cents dial: readings from -50 to -5 cents indicate that the string is Flat (tuned too low in frequency), requiring you to tighten the peg; readings between -4 and +4 cents indicate that the string is In Tune; readings from +5 to +50 cents indicate that the string is Sharp (tuned too high), requiring you to loosen the peg. Because tuning peg rotation directions vary across guitar headstocks (e.g. 6-in-line vs 3-on-a-side) and reverse between treble and bass sides, always watch the needle move toward zero rather than relying on clockwise or counterclockwise assumptions.

Auto vs. Manual String Mode

This tuner offers two versatile operating modes. In 'Auto' mode (default), the DSP engine analyzes incoming pitch and automatically snaps to the closest string target in your selected tuning preset, making it effortless to tune all six strings in sequence. In 'Manual' mode, you can tap on any specific string card (such as String 6 E2 or String 1 E4) to lock detection onto that target note. Manual mode is particularly valuable if a string is severely out of tune (more than two semitones away from its pitch) or when strong harmonic overtones temporarily confuse automatic note recognition.

How to Accurately Tune the Low E String

The Low E string (E2, ~82.4 Hz) is often the most challenging string for digital tuners to capture on consumer electronics, because built-in laptop and phone microphones have miniature diaphragms with high-pass filtering that attenuates deep bass frequencies below 100 Hz. For best results on Low E: pluck the string with the fleshy pad of your thumb near the 12th fret rather than right next to the bridge; plucking near the neck generates a much stronger fundamental wave with fewer piercing overtones. Ensure the other five strings are muted with your resting hand so their sympathetic vibrations do not compete with the low E fundamental.

Popular Alternate Tunings: Drop D, DADGAD, and Half-Step Down

While standard tuning is the default for most music, alternate tunings expand your guitar's harmonic palette. Drop D (D A D G B E) drops only the 6th string by two semitones from E2 to D2 (73.42 Hz), enabling one-finger root-fifth power chords and heavier rock/metal riffs. Half-Step Down / Eb Standard (Eb Ab Db Gb Bb Eb) tunes every string one semitone lower, reducing string tension for easier string bending and accommodating vocalists. DADGAD is an open modal tuning widely celebrated in Celtic, fingerstyle, and acoustic folk music. You can switch between these presets using the top tuning dropdown menu.

Guitar Tuner vs. Chromatic Tuner vs. Pitch Detector

DeviceTestRoom provides specialized tools for different musical tasks. The Guitar Tuner is specifically optimized for 6-string guitar frequencies, string order (6 to 1), and guitar-specific alternate tunings. The Chromatic Tuner tunes toward any of the twelve chromatic notes without assuming any specific instrument. The Pitch Detector identifies whatever note and exact frequency you sing, whistle, or play in real time. For guitar practice after tuning, use the Online Metronome to maintain a rock-solid practice tempo.

Troubleshooting

  • Tuner is not detecting sound: Ensure you have clicked 'Start Guitar Tuner' and granted microphone permission in your browser prompt.
  • Low E string is not detected or displays an octave too high: Pluck the 6th string gently using your thumb near the 12th fret, move your guitar closer to the microphone, and lightly mute strings 1 through 5.
  • Tuner jumps erratically between notes: Sympathetic vibration from unmuted guitar strings can cause harmonics; lightly rest your palm or fingers across the other five strings while plucking one string.
  • Electric guitar is too quiet to detect: Unplugged electric solid-body guitars produce faint acoustic volume; play near your computer microphone or run through a practice amplifier at low volume.
  • Wrong string is highlighted in Auto mode: If your string is more than two semitones out of tune, switch to 'Manual' mode and click the exact string you intend to tune.
  • Tuner needle never settles or constantly drifts: Avoid plucking repeatedly in rapid succession; pluck once firmly, let the note ring, and give the needle 1–2 seconds to stabilize.
  • String feels dangerously tight when tuning up: Stop immediately and verify that you are not tuning an entire octave too high; compare the string's pitch to the built-in reference tone by clicking the speaker icon.
  • Using a USB audio interface: If your guitar is plugged into a USB audio interface, select that input from the microphone dropdown menu in the tuner header.

Browser and device limitations

The online guitar tuner uses high-resolution Web Audio YIN pitch estimation to accurately identify frequencies down to 65 Hz. However, low-end microphone hardware limitations, excessive ambient background room noise, old corroded guitar strings, and mechanical instrument issues (such as slipping tuning pegs or binding nuts) can affect pitch stability and detection accuracy.

RELATED TOOLS
All tools

Common questions

What is standard guitar tuning?

Standard guitar tuning tunes the six strings from lowest pitch (thickest string) to highest pitch (thinnest string) as E2, A2, D3, G3, B3, and E4. This universal tuning arrangement provides an optimal balance between chord voicing ergonomics, scale fingering, and string tension across classical, acoustic, and electric guitars.

What are the six guitar string notes?

The six guitar string notes in standard tuning are: 6th String = Low E (E2 ≈ 82.41 Hz), 5th String = A (A2 = 110.00 Hz), 4th String = D (D3 ≈ 146.83 Hz), 3rd String = G (G3 ≈ 196.00 Hz), 2nd String = B (B3 ≈ 246.94 Hz), and 1st String = High E (E4 ≈ 329.63 Hz).

How do I tune a guitar online with a microphone?

Click 'Start Guitar Tuner', allow browser microphone permission, and position your guitar 6 to 18 inches from your device. Pluck one string at a time and let it ring. The tuner automatically identifies the closest string target and shows whether you are flat or sharp in cents. Turn your tuning peg until the needle reaches the center green 'In tune' zone.

Can I tune an acoustic, electric, or classical guitar here?

Yes. Standard tuning (E A D G B E) applies equally to acoustic, electric, and classical nylon-string guitars. Acoustic and classical guitars project clearly into any laptop or smartphone microphone. For an electric guitar, you can tune acoustically in a quiet room, play through a small practice amplifier, or connect directly via a USB audio interface.

What frequency is the Low E guitar string?

Under standard concert pitch (A4 = 440 Hz), the Low E (6th string, E2) has a fundamental frequency of approximately 82.41 Hz. If you adjust the reference pitch calibration in the tuner settings (for instance to 442 Hz or 432 Hz), the Low E target frequency scales accordingly.

What is Drop D tuning and how do I tune to it?

Drop D tuning changes only the 6th string, lowering it one whole step from E2 (82.41 Hz) down to D2 (73.42 Hz), while strings 5 through 1 remain in standard tuning (A2, D3, G3, B3, E4). Select 'Drop D' from the tuning dropdown menu to immediately update the target notes and needle thresholds.

Why does the tuner jump erratically between notes?

Note jumping is usually caused by sympathetic vibration from adjacent unmuted strings, high room noise, or plucking too rapidly. Lightly touch your resting fingers across the other five strings so only the active string vibrates, pluck once firmly with your thumb or pick, and let the note sustain.

Why can't the tuner detect my Low E string?

Low E (82.4 Hz) sits in the low bass frequency range, where some built-in laptop and phone microphones have hardware high-pass filters that weaken deep fundamental tones. To resolve this, pluck the string with the fleshy part of your thumb around the 12th fret to produce a fuller fundamental, move closer to the microphone, and mute all other strings.

In which direction should I turn my guitar tuning pegs?

Peg rotation direction depends on your guitar's headstock configuration (e.g., 6-in-line Fender style versus 3-on-a-side Gibson style) and how the strings were wound around the posts. Rather than relying on clockwise or counterclockwise rules, turn the peg slowly while watching the on-screen tuner: if the reading is Flat, turn the peg to increase string tension and raise the pitch; if Sharp, turn the peg to decrease tension and lower the pitch.

LanguageEnglishहिन्दी