Audio and music

Ukulele Tuner – Tune G C E A Online

Start the Ukulele Tuner and pluck one string at a time. The tuner detects incoming pitch with your microphone, compares it against standard G C E A, and displays whether each string is flat, sharp, or in tune.

Start Ukulele Tuner

Tune your soprano, concert, tenor, or baritone ukulele using your microphone. Standard tuning: G C E A.

Audio processed locally in your browser. Never recorded or uploaded.
Standard soprano, concert, and tenor ukuleles use re-entrant High-G tuning (G4 C4 E4 A4) where the 4th string is higher in pitch than the 3rd string. For instruments with a wound 4th string, choose the Low-G preset (G3 C4 E4 A4).

Understanding the result

The live ukulele tuner highlights your active string target, displays the nominal target frequency derived from your concert pitch calibration (A4 = 440 Hz by default), and measures pitch deviation in cents (-50 to +50 cents). A responsive cents needle meter indicates whether each ukulele string is Flat, Sharp, or In Tune (within ±4 cents) with clear directional guidance on how to adjust your tuning pegs.

How to use this tool

  1. Click 'Start Ukulele Tuner' and allow microphone access in your browser.
  2. Select your ukulele tuning preset—Standard High-G (G4 C4 E4 A4), Low-G, or Baritone (D G B E).
  3. Choose Auto Mode to automatically detect each string, or click a string button in Manual Mode to lock onto that specific note.
  4. Pluck one string with the pad of your thumb or index finger, and gently mute the other three strings.
  5. Observe the cents needle meter and directional advice: if Flat, tighten the peg; if Sharp, loosen the peg.
  6. Fine-tune slowly until the needle settles within the green ±4 cents center zone.

How to Tune a Ukulele Online with Your Microphone

Tuning your soprano, concert, tenor, or baritone ukulele online with your microphone is fast, precise, and beginner-friendly. Click 'Start Ukulele Tuner' and grant microphone permission in your browser. Hold your ukulele in normal playing position about 6 to 12 inches from your device's microphone. Select your tuning preset—such as Standard High-G (G C E A), Low-G, or Baritone (D G B E)—and choose either Auto Mode (which automatically detects the plucked string) or Manual Mode (locking onto a specific string target). Pluck one string at a time with the fleshy pad of your thumb or index finger, letting the note ring cleanly while resting your free fingers lightly on unplayed strings to prevent sympathetic resonance. The tuner isolates the fundamental frequency, compares it against the target note, and indicates pitch deviation in cents. If the needle rests to the left ('Flat'), gently tighten the peg to raise the pitch; if it swings to the right ('Sharp'), loosen the peg to lower the pitch.

Standard High-G Tuning: G4 C4 E4 A4 and Fundamental Frequencies

Standard ukulele tuning arranges the open strings in the familiar G C E A configuration, numbered from the 4th string (closest to your chin) to the 1st string (closest to the floor): 4th String (High G, G4) = 392.00 Hz, 3rd String (C, C4) = 261.63 Hz, 2nd String (E, E4) = 329.63 Hz, and 1st String (A, A4) = 440.00 Hz. These target frequencies assume the standard international concert reference pitch of A4 = 440 Hz. This tuning is universally used on soprano, concert, and standard tenor ukuleles across folk, pop, jazz, and Hawaiian music traditions.

Re-entrant Tuning Explained: Why the G String Sounds Higher Than C

Unlike guitars, violins, or cellos where string pitch ascends strictly from thickest to thinnest, the standard ukulele uses 're-entrant' tuning. The 4th string is tuned to High G (G4 ≈ 392.00 Hz), which sounds higher in pitch than both the 3rd string (C4 ≈ 261.63 Hz) and the 2nd string (E4 ≈ 329.63 Hz). Only the 1st string (A4 = 440.00 Hz) is higher. This close pitch clustering keeps all four strings within a single octave span of nine semitones (C4 to A4), producing the characteristic tight harmony, sweet chime, and joyful ring that defines the ukulele sound.

High G vs. Low G: When and Why to Use Low G Tuning

While standard High-G gives the ukulele its signature bright chime, many contemporary tenor and concert players prefer Low-G tuning (G3 - C4 - E4 - A4). In Low-G tuning, the 4th string is replaced with a thicker, often metal-wound nylon string tuned one full octave lower to G3 (approximately 196.00 Hz). This converts the ukulele into a linear instrument (lowest to highest: G3 < C4 < E4 < A4), expanding the instrument's bottom register by five whole steps down to G3. Low-G is highly popular for solo chord-melody arrangements, classical adaptations, and bassline accompaniment.

Baritone Ukulele Tuning: D3 G3 B3 E4

The baritone ukulele is the largest member of the ukulele family, featuring a longer scale length and deeper body resonance. Rather than standard GCEA, a baritone is tuned linearly to D3 - G3 - B3 - E4: 4th String (D, D3) = 146.83 Hz, 3rd String (G, G3) = 196.00 Hz, 2nd String (B, B3) = 246.94 Hz, and 1st String (E, E4) = 329.63 Hz. This tuning is identical to the top four strings of a standard 6-string acoustic or electric guitar. If you are tuning a baritone ukulele, select the 'Baritone (D G B E)' preset from the tuning dropdown.

Ukulele Sizes: Soprano, Concert, Tenor, and Baritone Differences

Understanding your ukulele size ensures you select the correct tuning preset: Soprano (approx. 21 inches) is the traditional compact size, tuned to High-G GCEA. Concert (approx. 23 inches) offers a slightly longer fretboard with warmer resonance, also tuned to High-G GCEA. Tenor (approx. 26 inches) is favored by professional performers for its rich projection and can be strung in either High-G or Low-G GCEA. Baritone (approx. 30 inches) is tuned DGBE and cannot be tuned up to GCEA without risking broken strings and bridge damage.

Auto Mode vs. Manual String Mode for Beginners

This tuner offers two operational modes tailored to your experience and playing environment: Auto Mode (Default) continuously analyzes incoming microphone audio and automatically snaps to whichever ukulele string target is closest. Manual Mode locks the detection engine exclusively to your selected string button (such as C4 or High G). If a string is newly installed, heavily slackened, or more than 50 cents out of tune, Manual Mode guarantees the tuner compares your frequency against the intended string rather than jumping to a neighboring note.

Ukulele Tuner vs. Guitar Tuner vs. Chromatic Tuner

Choosing the right tool ensures the fastest, most reliable tuning experience: The Ukulele Tuner is specifically programmed with re-entrant GCEA, Low-G, and Baritone string targets, visual nylon string gauges, and optimal frequency detection windows (100 Hz–900 Hz). The Guitar Tuner is designed for 6-string guitar registers (82 Hz–330 Hz) and standard EADGBE guitar drop tunings. The Chromatic Tuner identifies any musical note across all 12 semitones without assuming a specific instrument or fixed string targets.

Troubleshooting

  • No note appears: Ensure you have clicked 'Start Ukulele Tuner' and allowed microphone access. Move your ukulele within 6 to 12 inches of your microphone, pluck firmly with your thumb, and let the note sustain.
  • Tuner detects the wrong string in Auto Mode: If your string is severely out of tune, the pitch may be closer to an adjacent string. Switch to 'Manual Mode' and click the exact string you wish to tune.
  • G string detected in wrong octave (G3 instead of G4): Check whether your ukulele has a standard thin nylon 4th string (High G4, ~392 Hz) or a thick wound 4th string (Low G3, ~196 Hz), and select the matching preset.
  • Needle fluctuates or jumps between notes: Sympathetic vibrations from adjacent strings confuse the detector. Rest your palm or free fingers across the unplayed strings to mute them completely.
  • New nylon strings keep going flat: Brand-new nylon and fluorocarbon ukulele strings stretch substantially for several days. Gently pull each string upwards along the fretboard to accelerate stretching, then retune.
  • Friction tuning pegs slip or jump suddenly: Vintage or soprano ukuleles often use 1:1 direct friction pegs rather than geared tuners. Tighten the small screw on the back of the peg button slightly with a screwdriver to prevent slipping.
  • Microphone permission blocked: Click the padlock icon in your browser address bar, reset Microphone permissions to 'Allow', refresh the page, and click 'Start Ukulele Tuner'.
  • Bluetooth audio latency: Wireless Bluetooth headsets introduce significant audio latency and aggressive voice compression. For immediate needle response, use your computer or mobile device's built-in microphone.

Browser and device limitations

The online ukulele tuner analyzes monophonic audio in real time using the HTML5 Web Audio API and YIN time-domain autocorrelation. It is engineered to tune single isolated ukulele notes and cannot detect polyphonic strums or chords. Extreme background noise, multiple instruments playing simultaneously, or worn-out strings with inconsistent diameter can affect pitch stability.

RELATED TOOLS
All tools

Common questions

What is standard ukulele tuning?

Standard ukulele tuning is G4 - C4 - E4 - A4 (often abbreviated as GCEA). It is the universal standard tuning for soprano, concert, and tenor ukuleles across contemporary music.

What does G C E A mean on a ukulele?

G C E A represents the open pitch of the four strings ordered from the top string closest to your chin (4th string = G) down to the bottom string closest to the floor (1st string = A).

Why is the ukulele G string higher in pitch than the C string?

Standard ukulele tuning is re-entrant, meaning the strings do not ascend in pitch monotonically. The 4th string is tuned to High G (G4 ≈ 392.0 Hz), which is higher than the 3rd string (C4 ≈ 261.6 Hz) and 2nd string (E4 ≈ 329.6 Hz). This unique arrangement gives the ukulele its signature bright, ringing chime.

What is the difference between High-G and Low-G ukulele tuning?

In High-G tuning, the 4th string is tuned to G4 (392.00 Hz). In Low-G tuning, the 4th string is replaced by a thicker (often wound) string tuned one octave lower to G3 (196.00 Hz), providing a deeper bass register favored by soloists and fingerstyle players.

How do you tune a baritone ukulele?

A baritone ukulele is physically larger and is tuned linearly to D3 - G3 - B3 - E4, matching the top four strings of a standard 6-string guitar. To tune a baritone, select the 'Baritone (D G B E)' preset in the tuner dropdown.

Can I tune soprano, concert, and tenor ukuleles with this tuner?

Yes. Soprano, concert, and tenor ukuleles all share the exact same standard G4 C4 E4 A4 tuning pitches. Tenor ukuleles equipped with a wound low-G string can use the 'Low-G' preset.

What are the exact frequencies of standard ukulele strings?

At standard concert pitch (A4 = 440 Hz): 4th String (High G, G4) = 392.00 Hz, 3rd String (C, C4) = 261.63 Hz, 2nd String (E, E4) = 329.63 Hz, and 1st String (A, A4) = 440.00 Hz.

Does DeviceTestRoom record or store my microphone audio?

No. All audio analysis is performed 100% locally in your browser using the HTML5 Web Audio API. Audio data is never recorded, saved, or uploaded to any server.

In which direction should I turn my ukulele tuning pegs to tune up or down?

Tuning peg direction depends on your headstock style (traditional friction pegs pointing backwards versus modern geared machine heads pointing sideways) and how the strings were wound. Rather than guessing clockwise or counter-clockwise, pluck the string and watch the on-screen cents needle: if the reading is Flat (- cents), turn the peg in the direction that tightens the string; if Sharp (+ cents), loosen the peg to lower the pitch.

LanguageEnglishहिन्दी